Sanghvibrothers.com Global Exporters of Cutting tools, Machine Tools & Hand Tools Global Exporters of Cutting tools, Machine Tools & Hand Tools Global Exporters of Cutting tools, Machine Tools & Hand Tools company profile products Contact Us
 

Cutting Tools
Machine Tools

Click here to download SOLID CARBIDE CUTTING TOOLS CATALOGUE in pdf format.

HOME

HAND TOOLS
CLICK BELOW TO VIEW DETAILS OF EACH HANDTOOL
 
PIPE WRENCHES
ADJUSTABLE WRENCHES   
COMBINATION PLIERS |OCTAGONAL AND FLAT CHISELS
BALL PEIN AND CROSS PEIN HAMMERS
LONG NOSE AND FLAT NOSE PLIERS
SCREWDRIVERS






double ended open jaw

DOUBLE ENDED OPEN JAW SPANNERS
Conform to IS 2028 and 1981
Elegantly shaped European design
Drop Forged from high grade chrome vanadium steel
Light weight I -section frame with well rounded edges provides working comfort.
Large gripping ares accurately machined to close tolerances, prevent damage to nut/bolt. Nickel chrome plated for lasting rust protection.
Scietifically heat treated to give optimum strenght and wear properties.
15 degree head angle permits use even in spaces where only 30 degree arc movement is possible.
Special size of SAE & WW also available on request.

SIZES : 6 X 7, 8 X 9, 10 X 11, 12 X 13, 14 X 15, 16 X 17, 18 X 19, 20 X 22, 24 X 27 MM,
AND IN SETS OF 6,8,10
AND 12 PIECES.


TOP

 

combination ring and open open end pliers
COMBINATION RINGS AND OPEN END PLIERS
Designed for easier handling.Equal openings at both ends | Bihexagon ring end offset at 15 degree angle
Open end set at 15 degree angle.
Drop forged Chrome Vanadium Steel.
Finish : CP (Chrome plated polished heads)
This product is based on DIN : 3113, IS : 6389 - 1989
     
   
     
     
     
     
 
clamps
CLAMPS
Conform to IS 9181- 1979
Drop forged from high grade carbon steel and scientifically treated for high strenght and toughness.
Strong and yet light I - section frame
Swivel head on the ball end of heat treated operating screw ensures firm grip even on angled work pieces.
Drop forged from high grade carbon steel and scientifically treated for high strenght and toughness.
heat treated body and screw neither wear out nor distort even after intensive and extensive use
captive tommy bar at the screw and provides effortless tightening
Rust resistance phosphate finish
correct choice of screw thread type and pitch gives an extremly high mechanical advantage
the force applied at tommy bars multiples many times.
Openings 55, 80, 105, 155 and 205mm.
     
     
   
     
     
     
     
     
     
     
     
     
     
     
     
 

Side Cutting Pliers

SIDE CUTTING PLIERS
Conform to IS 9181 - 1979
Drop forged from high grade carbon steel scientifically heat treated | Precision matched cutting edges ground to optimum angle, cut thick and thin wires smoothly and effortlessly. Small land on the cutting edge resists severe stresses.
Designed for maximum leverage and effortless cutting.
Bigger diameter rivet made of hardened carbon steel ensures no play even after prolonged use.
Broad, rounded shanks give comfortable grip.
Cellulose acetate plastic insulated sleeves provides comfortable grip and withstand upto 5000 volts.
Should the pilers slip during use,the thumb prtector minimise the risk.
Excellent impact strenght even at low temperatures.
Latest, elegant, slim, European design
Anti corrosive, phosphate finish with polished head.
Also available with wite stripper.
SIZE : 155MM LONG

     
   
     
     
     
     
     
     
     
     
     
   
 

PIPE WRENCHES
Generally conforming to IS 4003 (part no1. 1978)
Drop forged from high grade, high quality carbon steel.
Shank and Jaw differently heat treated the teeth for high ware resistance. The handle and jaw for maximum toughness and bending strenght.
Precision machined gripping teeth on jaw and straight strenght provide firm non slip grip without damaging and breaking the pipes.
High grade mallable cast iron housing are adequately proportional to withstand severe stresses.Well rounded commerce at critical areas prevent developing of cracks.
Jaw movement is smooth and easy.
Heat trated carbon still rivet with bigger diameter ensures high torque and and long life without play.
Captive coil spring inside the housing keeps the wrench firm and free for use.
Adjusting not made of high grade steel is heat trated for long life and high strenght.
Outside diameter of the adjusting nut is deeply knurled for easy adjustment and non strip grip.
Withstands torque requirements as per IS
Handles are polished and smooth for good looks and comfortable grip.
Phosphatise oven painted and polished for rust protection and lasting attractive appearance .
Spare jaw and nut easily available.
SIZES
Length mm max
Opening mm
Suitable for pipe size
250
36
1"
300
45
1 1/4"
350
50
1 1/2"
450
70
2"
600
80
2 1/2"



   
   
 

Adjustable Wrenches
ADJUSTABLE WRENCHES
Generally confirming to IS 6149 - 1971
Drop forged from high grade carbon steel and scientfically treated for optimum strenght.
Light weight I- section handles

Minimum jaw play to grip the nut firmly without slipping
Reach confined spaces given and fully open, as the jaw shank does not protude from the handle
works even the confined spaces where only 30 degree are movement is possible, as 15 degree head angle is the correct handle for hexagonal nuts and bolts
Spring loaded knurl keeps the sliding jaw in position in normal use
Available in nickel, chrome plated and phosphated finish
Spare parts easily available
Aplication to 155 to 380 mm. Long spanner , 100 mm spanner is made out of chrome vanadium steel.
SIZES
Length mm
Opening mm
100
13
155
19
205
26
255
30
305
35
380
43

   
     
     
     
     
     
   
 

Combination Pliers
COMBINATION PLIERS
Generally conforming to IS 3656 - 1981 and 2615 - 1964
Drop forged from high grade carbon steel and scientifically heat treated.
Slim scientifically shape, easy to hold, handles ensure perfect grip even in confined spaces.
Finally serrated jaws with pipe grips and cutting edges serve multiple uses.
Big hardened long life carbon steel rivet does not develop play even after long use
Cutting edges accurately sharpened and individually adjusted ensure clean shape , cuts easliy and quickly
small land on cutting edge increaes its strenght and life.
Designed for maximum levarage with minimum effort
Perfectly aligned gap betwwen gripping jaws and cutting edges stays level even when cutting edges need resharpening after prolonged use.
Cuts hard steel and soft wires with equal ease
Also available with joint cutters (now made optional by ISI)

Also available with insulation, Sleeves of Cellulose acetate withand up to 5000 volts and grip firmly.
Thumb protectors minimise risks, should pliers slip during use

SIZES : 160, 180 AND 250 mm lenght
     
     
     
   
     
     
     
     
     
   
 

OCTAGONAL AND FLAT CHISELS
Conform to IS 402 - 1974 and IS 402 - 1964
Drop forged from high grade carbon steel and scientifically hardened and tempered
Choice of optimum angle of the cutting edge ensures minimumeffort in cutting without making the edge weak
Cutting edges ground accurately to correct angle and honed to smooth sharpness
Slighlty rounded edges of the body for firm and comfortable grip
SIZES
Length mm
Opening mm
150
16
200
20,22
200
25
250
30
300
32
135
9
150
20
200
25
     
     
     
     
     
   
 
Ball Pein and Cross Pein Pliers
BALL PEN AND CROSS PEN HAMMERS
heads conforming to IS 841 - 1968
High performance , hard heating hammer head dropped forged from selected high grade carbon steel
Controlled heat treatment of both faces maximise shock resistance and prevents mushrooming even after prolonged use.
Polished striking faces and black finished barrel sides
Easy - to hold, high quality, polished wooden handles for comfortable grip.
Securely fitted handles do not loosen even under rigororous use
Perfectly balanced for effecient performance Hammer heads available seperately

SIZES : 160, 180 AND 250 mm lenght
     
     
     
   
TOP
     
     
     
     
     
     
     
     
     
     
     
   
 
Flat Nose Pliers

LONG NOSE AND FLAT NOSE PLIERS
Conformed to IS 5658 - 1970
Drop forged from hi grade selected quality carbon steel
Scientifically heat treated for optimum hardness at cutting edges and serrations and toughness at remaining portions
Precision machined individually adjusted cutting edges, cut very fine copper wires as well as hard and soft steel.
Wires with equal ease.
tips serrations adjusted to grip thin sheets and fine wires
Finally serrated jaws ensure a firm and yet non damaging grip on work piece
Bigger diameter, hardened carbon steel, rivet ensures smooth movement without developing play even after prolonged use.
Single joint construction ensures lasting accuracy and long life
Cellulose acetate plastic insulated sleeves provided comfortable grip and withstand upto 5000 volts. should the pliers slip during the thumb prtector minimise the risk.
Excellent impact, strenght even the low temperature
anti - corrosive phosphate finishes with polished head
Latest elegant slim european design
withstand all tests prescribed under relevant indian standards

SIZES : 160, 180 AND 250 mm lenght

 

     
     
     
   
TOP
     
     
   
 
screwdriver

SCREW DRIVERS
WE OFFER THE MOST COMPRHENSIVE RANGE OF SCREW DRIVERS IN VARIOUS TYPES AND SIZES UNDER ONE ROOF
Generally conforing to IS 844 - 1979
Correct tip handle ensures firm grip in screw slot
Scientifically hardened high grade silico manganese steel blades ensure extremely long working life
presicion machined philips tip ensures firm grip to avoid slipping and damage of the head
Nickel chrome plated polished blades to prevent corrosion
Scientifically designed handles ensure firm non slip grip and adequate torque
Handles of the cellulose acetate plastic are unbreakable, non flammable shock - proof oil grease petrol and water and most chemical resistant
Firmly fixed blades in handles withstand high turning torque as well as bending
comprehensive range includes engineers , patterns electrtian pattern with PVC insulation
Phillips ytpe and Stubby Screwdriver

DIMENSIONS
ENGINEERS
BLADE LENGHT : 50 - 440 MM
BLADE DIA : 3 TO 10MM
TIP DIMENSIONS : 1.6 X 0.4, 2.3 X 0.4, 3 X 0.5, 3.2 X 0.5, 4.3 X 0.6, 5 X 0.6, 6 X 0.6, 6 X 0.8, 8 X 1.0,
8 X 1.2, 10 X 1.2 10 X 1.5 AND 13 X 1.9

ELECTRITIANS ( INSULATED AND NON INSULATED )
BLADE LENGHT: 125 - 300 MM
BLADE DIA : 3.5 - 5MM
TIP DIMENSIONS 3.2 X 0.5 , 4.3 X 0.6, 5 X 0.6, 5 X 0.8 MM

POKER
BLADE LENGHT 50 - 250MM
BLADE DIA : 3 TO 10MM
TIP DIMENSIONS: 00,00,1,2,3,4

STUBBY( REGULAR AND PHILIPS BLADE )
BLADE LENGHT 25 X 50 MM
TIP DIMENSIONS 7 X 0.8 , 9 X 1.2MM AND PHILIP TIP NO 2

TWO IN ONE FOR GREATER ECONOMY AND UTILITY
THESE SCREW DRIVERS HAVE ONE HANDLE AND ONE BLADE WITH TIPS AT BOTH ENDS, EITHER REGULAR OR
PHILIPS TIPS OR COMBINATION OF BOTH TIPS IN DIFFERENT SIZES EITHER OF THE TIP CAN BE USED BY
FIXING THE OTHER SIZE IN THE HANDLE ,
BLADE LENGHT 55 TO 250MM.
BLADE DIA 3.5 TO 8MM

SLOTTED TIP
THIS IS A SPECIAL SCREW DRIVER FOR USE IN VCR BLADE LENGHT 200MM , BLADE DIA 5MM


TOP